Condec CYLinder REGulator

$0.00

Condec’s Cylinder Regulator (CYLREG) assembly allows the operator to ensure a properly regulated pressure output from an existing in-house nitrogen supply cylinder that has a maximum charge of 3,000 psig. CYLREG has a maximum input pressure rating of 3,000 psig and a maximum operator controlled regulated output pressure based on selected model.

In the US, valve connections are sometimes referred to as “CGA connections,” since the Compressed Gas Association (CGA) publishes guidelines on what connections to use for what products (e.g., in the U.S., an argon, helium, krypton, neon, tetra fluoro methane, xenon or nitrogen cylinder will have a CGA-580 connection on the cylinder). These CYLREG assemblies have been designed for use with nitrogen and the factory needs to be consulted prior to use with other gases. Note: if the nut on a CGA connection has a notch in it, it uses a left-handed thread.

CYLREG assembly has a Condec REG series pressure regulator with upstream (inlet) and downstream (outlet) pressure gauges. Once attached to the cylinder using supplied CGA-580 connection, unit allows operator to monitor cylinder supply pressure and regulate the flow of gas, based on pressure shown on the downstream gauge. Unit also has a male 7/16-20 37° AN-4 output port for attachment to downstream device. As an example, the output port connection may be attached to a Condec UPC5000 or UPC5100 portable pressure calibrator via standard fill-port hose for use in refilling their internal cylinder.

When a CYLREG assembly is mated with our patented Condec model Orion 2C Cased valve assembly, it allows the operator to have regulated cylinder pressure with finger-tip downstream adjustment utilizing the input and output needle valves and vernier.

Download product PDF
Categories: ,

Features

  • Same Condec “REG” series regulator as used in our portable pressure calibrators and Source 3000
  • Low torque required by operator for pressure adjustment
  • Single stage, venting type with spring controlled piston
  • Integral inlet filter used to promote long life when used in clean systems
  • CGA-580 fitting for direct connection to the in-house cylinder
  • 1/4 inch, 37 degree male output port connection

Applications

  • Gas applications
  • In-House nitrogen cylinder regulation

Specifications

Maximum Primary (inlet) Pressure:
3,000 psig (206.9 Bar)Pressure Media:
Clean dry gaseous nitrogen or equalOperating Temperature:
0˚F to 140˚F (-18˚ to 60˚C)		 Pressure Regulator:
3,000 psig, single stage, self venting, non-bleedPressure Gauges:
(2) two-inch diameter, 0-4,000 psigPressure Fittings:
Input: CGA-580 Brass, mates with customer’s nitrogen cylinder Output 7/16-20, 37 degree Flare Male JIC, Steel, Trivalent Chromium Zinc finish

Options

55282 Hose Kit,Fill Port Input UPC5000 UPC5100 DPC1000 DPC2000 5 Foot Long hose, 2500 psig working pressure, fitted with Quick Disconnect Brass Socket on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End
55251 Hose ASSY,Pneumatic 5 FT Male 1/4-18 NPT x Female Swivel 7/16-20 JIC 37 Degree AN-4 2500 PSIG working pressure, UPS3110 UPC5000 UPC5110
55253 Hose ASSY,Pneumatic 10 FT Male 1/8-27 NPT x Female Swivel 7/16-20 JIC 37 Degree AN-4 2500 PSIG working pressure
55254 Hose ASSY,Pneumatic 15 FT Male 1/8-27 NPT x Female Swival 7/16-20 JIC 37 Degree AN-4 2500 PSIG working pressure
55256 Hose ASSY,Pneumatic 20 FT Male 1/8-27 NPT x Female Swival 7/16-20 JIC 37 Degree AN-4 2500 PSIG working pressure
67250 Hose ASSY,Pneumatic 5ft 0-3000 PSI Working Pressure One End 7/16-20 JIC 37 Degree Female Swivel Other End 1/4 Male NPT
161922 Hose ASSY,Pneumatic 10ft 0-3000 PSI Working Pressure One End 7/16-20 JIC 37 Degree Female Swivel Other End 1/4 Male NPT
58476 Fitting Kit,Universal Pressure
54854 Seal,Cheat Pad UPC5200 Source 3000, Orion 2C Cased Unit, non-cased Orion 3A and seal plug 68862, also adjustable adapters 120422 and 120462
180505 Fitting, Adapter Female Swagelok QC4 quick disconnect on one end and 1/4-18 NPT Female on the other end SST 3,000 PSI working pressure used when connecting hose 67250 or 161922 to Source 3000 PN 98916 Input Fill Port

Product categories