When flexibility is required for weighing large items such as barrels and drum pallets, the RoughDeck BDP floor scales’ low profile design and optional hinged access ramps enable effortless loading and unloading. Live side rails permit items exceeding the standard scale dimensions to be weighed accurately where they sit on the scale. Design feature options include treaded mild steel or smooth stainless steel top plates, and environmentally sealed or welded-seal load cells catering to a vast range of application conditions.
All of our floor scales, unless specified otherwise, are built with lifting holes to assist our dealers during installation, or to later service the scales. The lifting holes are not the same size on all of our scales and in the PDF on the Resources tab, you will find a chart that lists the standard size and quantity of eyebolts needed for our scales.
Four adjustable stainless steel SUREFOOT™ support feet
Diamond tread top plate
Alloy steel load cells
Specifications
End Load Capacity:
1,000 lb: 100% full scale
2,500 lb: 80% full scaleCable Length:
10 ft (3 m)
Junction Box: TuffSeal® JB4SS stainless steel, NEMA Type 4X junction box with signal trim cardWelding: Stitch
Threaded Eyebolt:
Hole (1/2-13 NC) located in center of deck for easy lifting
Warranty (limited): Weldment: Five-year
Load cells: Two-year
All other components: One-yearApprovals:
NTEP 03-060, Class III 2,500 d
Measurement Canada AM-5578
(500 kg) Class III 2,500 d
(1,000 kg) Class III 2,000 d
