SCT-30 Signal Conditioning Transmitter and Signal Indicator
$0.00
For PLC systems that require weight data from a scale, the compact SCT-30 transmitter delivers equivalent signal-conditioning function without the cost or bulk of a full-size weight indicator/controller.
Powers up to eight (350?) load cells in parallel (with a 24-bit A/D converter)
A/D converter 24-bit (16000000 points) 4.8 kHz
16-bit analog output: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, ?5 V, and ?10 V
Mounting on Omega/DIN rail for back panel or junction box
IP67-rated enclosed versions
Diagnostic message for load cell disconnect and over capacity errors
Specifications
Power:
Input: 12 -24 VDC
Power consumption: 3 watts
Excitation Voltage:
5VDC, 120mA, 8 x 350?
Analog Signal Input Range:
+/- 39mV
Analog Signal Sensitivity:
0.1 ?V/graduation minimum
1.0 ?V/graduation recommended
A/D Sample Rate:
300 Hz
Resolution:
Internal resolution: 16 million counts
System linearity: ? 0.01% full scale
Serial Port:
RS-485
Analog Output:
Optoisolated, 16 bit
0-20mA, 4-20mA (max 300 ohm)
0-10VDC, 0-5VDC (min 10k ohm)
Display:
Eight-digit alphanumeric tow line LCD, 5 mm high
Keyboard:
Control knob and DIP switches
Temperature & Humidity:
Working Temperature: -4?F to 140?F (-20?C to 60?C)
Humidity: 85% non-condensing
Dimensions (W x H x D):
SCT converter: 3.54 x 3.74 x 2.36 in
(90 x 95 x 60 mm)
IP67 enclosure: 6.69 x 5.51 x 3.74 in
(170 x 140 x 95 mm)
Weight:
1 lb (0.5 kg)
Rating/Material:
DIN rail mount: NEMA Type 1
Sealed enclosure: NEMA Type 4/IP67, plastic enclousre, clear cover, six PG9 cord grips
Warranty:
One-year limited warranty
Options
131129 Lit,Manual SCT 10 Series Sct Weight Transmitter List price: $25.00
Models
Part #?156794
Product DescriptionIndicator,SCT30 SCT30, 12-24VDC, Analog Output, and RS485 Serial Port DIN Mount, Displays mV and Analog Output Signal Only. Does Not Display Weight.
Part #?156834
Product DescriptionIndicator,SCT30 SCT30, Enclosed in a Plastic Junction Box, 12-24VDC, Analog Output and RS485 Serial Port.
