MSI-4260IS (Intrinsically Safe Crane Scale)

Specifications

Accuracy:
? (0.1% +1 d) of applied load
Resolution:
3,000 to 5,000 d standard (up to 10,000 d available)
Enclosure:
NEMA Type 4, IP66 marine grade 356 alloy anodized
cast aluminum
Instrinsic Safety:
US Listings
FM16US0156X
IS / I, II, III / 1 / CDEFG / T4 Ta = -20?C to 50?C
I / 0 / AEx ia / IIB / T4 Ta = -20?C to 50?C Ga
20 / AEx ia / IIIC / T135?C Ta = -20?C to 50?C Da
Canadian Listings
FM16CA0092X
IS / I / 1 / CD / T4 Ta = -10?C to 50?C
IS / II, III / 1 / EFG / T4 Ta = -10?C to 50?C
I / 0 / Ex ia / IIB / T4 Ta = -10?C to 50?C Ga
20 / Ex ia / IIIC / T135?C Ta = -10?C to 50?C Da
ATEX Listings
FM16ATEX0038X
II 1 G Ex ia IIB T4 Ga -10?C ? Ta ? 50?C
II 1 D Ex ia IIIC T135?C Da -10?C ? Ta ? 50?C
Lifting Eye, Shackle & Hook:
Crosby or equal with 360? thrust-bearing swivel hook
Design Overload:
200% Safe / 500% Ultimate (except where noted)
Functions:
Power: Turns unit on or off
Zero: Zeros applied load up to 100% of capacity
(limited range in NTEP Certified configuration)
Tare: Tares applied load and displays weight in Net
mode F1: Programmable as test, units, net/gross, total
and peak hold
Display:
Five-digit, 1.2 in (30mm) LED with programmable
brightness control
Displayable Units:
Pounds or kilograms selectable
Annunciators:
COZ, Net, Gross, Total, Peak, Low Battery, lb/kg,
Motion, Setpoints
Power:
12 volt rechargeable battery.
115/230 VAC approved battery charger is included
Operating Time:
Up to 200 hours between charging with typical use
Auto-Off Mode:
Select for 15, 30, 45 minutes, 1 hour or Off
Auto Sleep Mode:
Power down during non-use and power up with
weight change or any key press
Service Counters:
Counts number of lifts over percentage of capacity and
lifts over capacity
Calibration:
Digital
Filtering:
OFF, LO, HI-1, HI-2 selectable
Warranty:
One-year limited warranty
Approvals:
NTEP CC 89-090 – 500 lb-2,000 lb (250 kg-1,000 kg)
NTEP CC 89-090A1 – 5,000 lb-70,000 lb